Shaved door handles, shaved tail gate handle moved to inside of bed. Driver side window needs motor. Internal specifications for Chevy trucks were similar from year-to-year, with buyers having the choice between different sizes and types of motors, transmissions and other major parts. Visit our site at www. It's a southern Oklahoma truck that is detailed beautifully has rebuilt mechanics with upgrades. The various engines created 210 to 360 foot-pounds of torque.
Interior needs work on the headliner and dash pad. Neither will fit the rear of a 350 V-8. And then there was the smaller bellhousing bolt pattern used on the2. Show quality restoration by a man that typically restores 55 to 57 Chevys. Also available was the M20 Muncie, a four-speed manual with a first gear ratio of 6. Call 662-312-4922 with any questions.
Chevrolet, a well-known producer of domestic trucks, has been manufacturing versions of the half-ton truck since 1918. Horsepower created ranged from 120 hp for the 250-cubic-inch inline engine to 230 hp for the 454-cubic-inch V8. Inside of bed painted to match the truck. They are what is known as a 60 degree block and the 350 is a 90 degree block. Sounds, drives and handles good.
The only way you could use it is to use the 85 engine with it and I have doughts you would want either of thos … e dogs in your Silverado. A 350 cubic-inch V-8 engine came with 175 hp, 275 foot-pounds of torque, a 4-inch bore and a 3. Signing up for the Auto Locator Service gives you the inside track to our most up to date inventory and helps you find the vehicle you are looking for. Small hole in both cab corners. Stainless radiator cover, power steering, newer hoses and belts, stainless on underside of hood and fender wells, power disc brakes in front, 12 bolt rear with drum brakes, ladder bars, dual exhaust with stainless tips. Black padded dash looks new, black door panels look new. If you are not already Over drive don't worry about it.
It was the last year that the 250-cubic-inch inline motor was available in Chevy trucks -- this motor was replaced in 1985 by a 4. You should then be able to see … the turn signal switch. This was the first model year where a four-speed manual transmission was available on non-diesel models. Also available was a 305 cubic-inch V-8 engine with 160 hp, 235 foot-pounds of torque, a bore of 3. All truck models had a front track measuring 65. You will need a 4L60 turbo, later model 4L60E Turbo, or a late 80's 700R4 from off of the back of a 4. Other unleaded gasoline engine options were a 292-cubic-inch inline, a 305-cubic-inch V8, a 350-cubic-inch V8 and a 454-cubic-inch V8.
Gets thumbs up all over town. This engine had a bore of 3. The 8-foot long bed model had a wheelbase of 131. Beginning in 1983, a diesel engine became available on the truck: it was a V-8 engine displacing 379 cubic inches with 135 hp and 240 foot-pounds of torque. The 85 4X4 S-10 Blazer did not have the 4.
It had a first gear ratio of 3. K20 trucks had axle ratios available from 3. Chevrolet first introduced different body styles for trucks in 1973, with a more rounded, longer-running line of styles that would be used in Blazers, Suburbans and full-ton trucks through 1991. Dry clean body and floors. Try Our Auto Locator Be one of the first to get email notifications when the vehicle you are looking for is added to our inventory.
Dual outside mirrors, tailgate has a Mural of the truck cleared over. The Chevy runs and drives great. A 379-cubic-inch V8 diesel engine was also available. The truck bed and tailgate is in great condition. The interior is Black cloth and vinyl on a bench seat that looks new. K10 and K20 models came with aluminum, chain-driven cases that had lower ratios but lacked the durability of the cast-iron, gear-driven case found in the K30 model.
Several different engine packages were available for buyers of new Chevy trucks in 1984. After the screws have been pulled, the tumbler mechanism should come right out. The four-speed manual transmission had the widest gear ratio, ranging from 6. The K10 model had a height from road to roof of 72 inches while the K20 model had a height of 73. The wheelbase of the short-bed truck measured 117 inches; its length was 191. Considered a full-size light-duty pickup, the half-ton truck got its name because of the payload size it could haul.
Show Quality Resto on Oklahoma truck! Then pull the plastic cover and anything else that is in the way. If the S10 transmission was of the 2 wheel drive type you could swap them. The model with a 6-foot long bed had a wheelbase of 117. In 1984, Chevy K10 and K20 four-wheel drive trucks were available with different transmission options. New door panels, headliner, carpets and leather-like upholstery. But you must have at least a 4.