While the intent of this page is to identify the common issues pertaining to the 1993 Corvette, it is not an all-inclusive list and should be used for reference only. Other production chassis structures in the race car include the windshield frame, the hoop around the rear of the passenger compartment, the door hinge pillars, the drivetrain tunnel, the firewall and the floor pan. Inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Chevrolet Corvette is a car that has a 2 door coupé type body with a front mounted engine driving through the rear wheels. Only offered for the year, the hatchback coupe body shared styling themes from the previous two generations of Corvettes though it did have reduced front and rear overhangs as the wheels moved out toward the corners of the vehicle. Once thieves discovered this weakness, it markedly reduced the value of this early system.
A newly optional passive keyless entry system that was unique to the Corvette as it automatically locked or unlocked the doors as the driver left or approached the car. Rear Axle Service: Check the gear lubricant level in the rear axle and add if needed. Florida-based Greenwood Automotive Performance unveiled a bolstered Corvette coupe. Weighing 250 pounds lighter, the '80 Corvette was available in either manual or automatic transmission. The convertible included a trunk that was accessible from outside of the vehicle, a feat that had not been achieved since the 1962. The new engine was rated at 300 horsepower due to significant revisions to the accessory drives, cylinder heads, fuel injection and cooling system. The standard engine continued to remain a 300-horsepower 327 small-block V8 that was topped by a four-barrel carburetor, the wheelbase remained at 98 inches.
The three-speed automatic was optional while standard transmission continued with a four-speed manual. That added roll stiffness, which minimized the size — and weight — of the stabilizer bars. Remedy Replace The Power Steering Gear Inlet Hose With An Improved Design. All leather seats have the 40th emblem embroidered due to an error on the drawings sent to the seat supplier. The rear-mounted transmissions were either a version of Chevy's own 4L60-E four-speed automatic or the Borg-Warner T56 six-speed manual or Not much was changed for the 1998 Corvette except for the addition of a convertible model to the C5 Corvette range. This unusual transmission was a synergy that allowed the Corvette to keep a stout 4 speed, but add an overdrive.
A fluid loss may indicate a problem. This is not based on mileage, but on engine revolutions and engine operating temperature. Perhaps one of the most notable improvements to the 1993 Corvette was the introduction of a. He created the Sting Ray by designing a new body for it with a high waistline, sharply creased fenders and a chiseled prow. The engine was largely assembled by hand and was Dyno tested before being sent to Chevrolet. Then release the parking brake followed by the regular brake.
Engine Coolant Level Check: Check the engine coolant level and add the proper coolant mixture if necessary. The output of the V8 was increased to 230 horsepower due to the new and much more efficient induction system. Inspect other brake parts, including calipers, parking brake, etc. In 1993 Corvettes, the engine developed 300 horsepower net at 5,000 rpms. Now, as the Corvette prepared to turn 40, decided to honor the milestone by releasing a special edition Corvette to pay homage to the American legend.
Power is supplied by an overhead valve, 5. That launched a renewed effort on racing and the benefits of technology transfer. Interior redesigned to incorporate driver's-side air bag. The suspension of the Z06's was retuned to perform even better than previously. These forums are also a great way to meet fellow fans and swap Corvette stories and advice. The new V8 was backed with a three-speed manual transmission, this was done by Arkus-Duntov, and became the single most important modification in the car's history. The Corvette division approached Lotus with the idea of developing the world's fastest production car, to be based on the C4 generation of the Corvette.
The Corvette emblem was originally going to have an American flag in the design, but was changed well before production. Consequence This Condition May Cause An Inadequate Seal At The Connection, Potentially Leading To A Fuel Leak. Standard equipment included a four-speed manual transmission which replaced the three-speed. Check the axle and repair it if needed. The Corvette was always a 2-seater vehicle, Chevy has always offered and included features and equipments that were sophisticated enough to please owners and buyers. The viewers at the New Show loved the new 1953 Motorama Corvette nearly as much as Cole and thousands of potentials clamored for information as to when they could buy it.
The engine torque was rated at 340 lbs. Clean the outside of the radiator and air conditioning condenser. Besides the two exterior updates not much was changed on the '61 Corvette. Only two engine choices were offered in 1975, the base engine being the 350 V8 which achieved only 165 horsepower, and the L82 which only reached 205 horsepower. Unfortunately power was reduced again, making the base 350 now rated at 190 horsepower.
Its body wasn't stamped from steel but, rather, molded from reinforced fiberglass. Three changes were made to the base engine to make it much quieter. The engine is known to cutoff without warning during normal operation. At the Waldorf Astoria — and at every other Motorama stop across the country -- Chevrolet's sporty little roadster ignited many Americans' imaginations. Reducing the wheelbase down by four inches to 98, Zora built a much stiffer ladder frame than the previous X-member design, than now allowed the passenger compartment to be sunk down between the rails. Indy Pace Car special edition.
Do this until the vehicle is held by the parking brake only. The targa top bolted into place, becoming a structural component, rather than simply latching on like T-tops. While this car was for the enthusiasts who wanted to mark the milestone year, other consumers could purchase a 1993 model with a greater emphasis on performance and classic looks. Moving to a rear transaxle dramatically improved the weight balance, as well as enabling a smoother ride and greater interior space. The engine could still be any of the four different variations on the 283 small-block. This was most the powerful production Corvette at the time. For the 1957 model year, Chevy built 6,339 models, with only 1,040 of then carrying the fuel-injected engine.