If the air conditioning system in your vehicle needs refrigerant, be sure the proper refrigerant is used. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. You now know the capacity. Lubricate lock cylinders with graphite lock cylinder lubricant.
Remove the last four bolts and the pan when the fluid finishes draining. Your owners manual tells you exactly what the fluid capacity is for a pan change and a complete change. Remove the filter, Look for the filter and the O ring between the filter and valve body and remove it. Final drive for automatic transmission only. This information can be found in your owner's manual. You need to change all the fluid which requires a more involved change. Drain the oil and install a new filter.
If you want to change engine oil, for instance, by yourself and save a couple of bucks you need to know how much this fluid engine oil is needed for Chevrolet Silverado 2000. Most parts houses will take it. Check with auto parts store to get correct type. You can share this information with your friends. They are all a little bit different, but the procedure is the same when you want to change the transmission fluid and filter.
Here is how to change the transmission fluid and filter on a Chevrolet pick up truck. You can share this information with your friends. When adding, be sure to fill to the appropriate level, as recommended in user manual for your Chevrolet Tahoe 2000. Test the battery if a tester is available. The filter is located inside the pan which must be removed.
Refill it with about 3 quarts then check it. They should be able to tell you how many quarts your car requires. This video shows you how to add transmission fluid to your 2005 Chevrolet Tahoe. Note: all capacities are approximate. Both the Chilton's and Haynes for my '76 Aspen say the 904 holds 4 quarts. We have this information and we give it to you for free. After refill check oil level.
They are all a little bit different, but the procedure is the same when you want to change the transmission fluid and filter. Be careful not to overfill the transmission when you put transmission fluid in it, as it may cause damage. Park the vehicle on a level surface. Run the engine for 15 seconds. Lubricate door hinges with Lithium grease. Changing break fluid in Chevrolet Silverado 2000 is also is a simple task.
The easiest type of technical maintenance is changing engine oil, axles oil, manual and automatic transmission oil. Apply the parking brake and the service brake. I have experimented with different wt,s. Reset the oil life reminder. The easiest type of technical maintenance is changing engine oil, axles oil, manual and automatic transmission oil. You can order one from a dealer, find one at a salvage yard, ebay, or one of these sites:.
You now know the capacity. Note: all capacities are approximate. After refill check oil level. You need an owner's manual to know what items to service and when, and for specifications. Add about 3 to… depending on the model of transmission you have you may have to drop the transmission pan.
Put grease into any grease fittings on the front end. Here is how to change the transmission fluid and filter on a Chevrolet pick up truck. This should work on any Chevrolet pick up truck made in the 1980s or 1990s. This information can be found in your owner's manual. Add more fluid if needed and replace the dipstick in the filler tube. I tried mobile one 90 wt sysnthetic.