If an improperly-coded key or other device is used, the engine will not start. Time and mileage booklet that came with your vehicle emissions control systems. Turn it clockwise to lock it in place. This turns the adjustment switch off to keep your setting. In normal driving, the retractor lets you move freely in your seat while it keeps some tension on the belt. Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched.
These include a strong steel framework that forms a safety cage around the passenger compartment, front and rear crush zones, a collapsible steering column,. They provide extra comfort when driving, and also do not allow the body to swing in corners and when overcoming large irregularities. Together, airbags and seat belts provide the best protection. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door. Make sure you put the sun visor back in place when you are getting into or out of the vehicle. Utility vehicles have a significantly higher rollover rate than other types of vehicles.
Select the empty position the disc indicator is not shown on the center display by pressing the appropriate side of the preset bars. Have the exhaust system inspected for leaks whenever: Carbon monoxide gas is toxic. To cancel this feature, push on the switch again to get it to pop out. The first file of each folder plays for about 10 seconds. You need both hands to adjust the restraint.
Be sure to adjust the mirrors before you start driving. Pull it turning the switch next to the parking lights, taillights, side marker back to return to low beams. If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. Rear center seating position Remove the head restraint see page. In addition, most states and all Canadian provinces require you to wear seat belts.
For spare For normal tire tire Reinstall the cargo area floor, and close the tailgate. It may also be combined with data from other sources for research purposes, but it remains confidential and is never linked to the vehicle owner. The cargo area light has a two position switch. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen. Moving the front seat or seat-back forcibly back against the folded rear seat.
Have passengers adjust their head restraints properly as well. To keep stale air and mustiness from collecting, you should have the fan running at all times. A beeper will sound if the vehicle is driven with the parking brake on. Time and mileage booklet that came with your vehicle emissions control systems. The screen changes as shown above.
Several warranties protect your new vehicle. Make all settings before you start driving. Driving with the parking brake not fully released can damage the brakes and tires. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. To close the lid, push it down until it latches. If you unlock the door, but do not open it within 15 seconds, the lights will go off.
To flash the high beams, pull the lever back lightly, then release it. The National Highway Traffic Safety Administrations also gave it perfect five-star front and side-impact ratings and a four-star rollover rating. After properly securing the child seat see page 51 , route the tether strap over the top of the seat-back. The look of the interior in all black is a bit overwhelming, but I preferred it to the light taupe the company also offers. Malfunction Indicator Lamp For more information, see page 394. Higher ground clearance has many advantages for off-highway driving. Take the vehicle to your dealer to have the system checked.