Make sure to always have a backup fob fully programmed as a spare or you will pay the price. To end this programming, open then close the driver's door or put fob in the slot. I wanted new keys so I ignored ebay silver logo keys that were used. Fords are generally the easiest of all to program. That would be a problem, say, if someone kept losing fobs, and suddenly found that they could not program any new ones into the system. Do this 3 times within 10 seconds. It was slightly more matte black than the smoother black fobs that originally came with the car but it is obviously the same fob.
If any do not program, check the batteries. Get the original vehicle vin number and check with your dealer. A lot of people on this site have griped about the cost of this. Insert old fob in slot and close door. Please Contact a locksmith in your area prior to purchase to be sure they have the proper add-on equipment to program this remote to your vehicle. Each time a remote button is pushed, the locks should cycle. Step 1: Open driver side door and leave open.
This is supposed to confirm that the car recognizes the original fob. Or if someone bought a used Prius that had already had multiple keys programmed, but the buyer was only presented with a siingle fob, and then tried to add some new ones. You cannot use a black fob with a higher level trim car one that has Smart Entry. So far my dispute has held, including shipping cost. I was allowed to dispute the charge upon sending the keys back to the key dealer, and giving them the postal service conformation number. Hold lock and unlock near dashboard for a few seconds.
Or if someone bought a used Prius that had already had multiple keys programmed, but the buyer was only presented with a siingle fob, and then tried to add some new ones. Used keys for your correct key style Black or Silver logo may work if they are the same year. Such a pain Click to expand. This is a standard 2008 Toyota Prius Keyless Entry Remote key combo, not smart remote for your Prius. Car is in fob programming mode at this point. Price above is quoted for one replacement keyless entry remote. The doors will now automatically lock and unlock to let you know that the programming mode has begun 8.
You can dispute the charge also if you send back the keys. Close it again and open it again for a total of two times swung open. This remote will not work with the smart system. It is true that u can only program 5 fobs to the entry system. Within 3 seconds, press just the lock button on new fob.
Step 5: Close and open the drivers door 3 times. Step 2: Lock and unlock the drivers door using the power door lock switch on the door. We have an extensive stock of keys and remotes to get you back on the road as soon as possible sparring you the hassle and expense of towing your vehicle to the dealership. Insert and remove old fob once. Watch the blinking red anti-theft light on the dashboard. Now for the door lock functions. So far my dispute has held, including shipping cost.
Let's not get into the whole seed code thing for now. When you have done that repeat the second part of the process with the other key hold unlock and press lock 3 times. Remove the key You will have to program all old remotes because the transmitter memory was overwritten!! The smart key operation is kind of gimiky to me, and I don't see a need for it. Instructions are listed in the owners manual on how to do this. A minor inconvenience like this shouldn't affect someone this much. First, there are two kinds of fobs depending on your car. Please Contact a locksmith in your area prior to purchase to be sure they have the proper add-on equipment to program this remote to your vehicle.
Open the driver door with no fob in slot and the doors unlocked. This model does not have Smart Entry feature where you can keep the fob in your pocket to open the door or start the car. Insert and remove old fob once. When it stops flashing and goes dark, your new fob is all set. My dealer says if a used smart key is the right key part number , it can be reprogramed with your other keys to work on your car. There is instructions in the owners manual.
The case is aftermarket so there will be no logo on the back. If you have no working unit, then special equipment is required to get these done. The dashboard light will blink at a rate of about two seconds on and two seconds off, for about one minute. And I did boff it once, in the middle of procedure B, but no big deal, just started from the top and it worked fine. Insert old fob your fob that currently works into slot and remove it 4 times in a row, and insert it a fifth time but leave it in there! One Exception is newer Chrysler all in one units which are programmed as one unit. Anyways, find below, pasted, the procedure that worked for me. My dealer says if a used smart key is the right key part number , it can be reprogramed with your other keys to work on your car.