Great care should be taken to properly identify the unit you are working on as both the S542 and S547 appear to be the same and with the great variety of ratios available, it is easy to order the wrong parts. Select this link to see what. We also stock car parts as well. You can find the identification tag on the left side of the transmission case. The bell housing is integral to the case.
Similar in appearance to the Ford top loader transmission but has overdrive 4th gear. Our operation now includes two warehouses and a comprehensive dismantling shop, equipped with a computerized tracking system keeping tabs on nearly every part in our inventory. The unit weighs in at 230 lbs. An easy way to identify this unit is by the cooling lines mounted to the case as found in automatic transmissions. Connect with passionate Ford fans and owners just like you.
This unit has an aluminum case with integral bell housing, a center support, and rear case. We sell only high quality used Ford F-350 Pickup automatic transmissions, with 1-3 years warranty and free shipping. Let them decide whats best for their needs. Id tags are mounted on the left side of the main case. This unit is used in Ford F250, F30, F450, and Super duty trucks from 1987-94. Truck Years Type Description F-100 1956-1973 Borg Warner T-18 Top loaded heavy-duty 4-speed transmission with cast iron case and shift cover. Worn out synchronizer cones or syncro rings can cause grinding noise during shifting.
Use our online shopping cart, just double click the part number and see additional information, add to cart and or proceed to check out. The S542 is found behind 300, 302, 351, 460, and diesel power plants. Our discount used 1987 Ford F-350 Pickup transmissions come directly from a dependable network of modern junk yards. Select the parts you require from the following list and give us a call. . Available in 2 and 4wd drive versions. In 1999 the case was changed for 4.
Used in 1978-84 Ford light duty pickups and vans. The Super duty model has a mechanical park brake assembly mounted to the extension housing. See our specially designed repair kits to resolve these problems. You can hear this noise with the clutch depressed. A noise in one gear that gets worse with speed can be caused by a chipped tooth in that gear. Search by Year, Make, and Model synchro rings, , , , , , , , and.
Shipping Item will be shipped freight. See the complete line of products that we offer at. List your items fast and easy and manage your active items. The case is very similar to earlier style units with case length shorter on 4. Has an aluminum case with shifter turret mounted on extension housing. In 1996 case is changed to accommodate modular motor 4.
Synchronized in all forward speeds with 4th being overdrive. To speak to a Drive Train Expert or to place an order call toll free F-Series Truck 4. Produced in 2 and 4 wheel drive versions. Started in a barn by father and son in 1992, Rasco Used Truck Parts has grown into a modern automotive recycling facility, processing parts from nearly 10,000 vehicles and operating on a 75-acre lot. Synchronized in 2nd,3rd, and 4th, with 1st and reverse non-synchronized.
Three shift rails mounted to the left side of case. There is also a passenger car version of this unit with lighter duty bearings and gear ratios. Shifting problem in the sifter stub can increase with use and time, suggest you replace your shifter with our easy to install Short Through Shifter Kit. But now that I'm looking to continue with the ford super duty line of truck I'm told that this option is not valid anymore. This unit was produced for cars also but with lighter duty bearings and gear train. Very similar in design to M5R1, but larger with shift lever located in center of shift cover.