The crash took place in the Windows kernel. Happens after around 2 hours or so. Hope I was able to help you fix the error. For the windows driver verifier they recommend repeating the process until you can use your computers for 36 hours without bsod. Windows Operating System under the Name column.
Take out the hard drive, install it in another machine, and run on it. Go for the one that says Restart now and check for problems. I then ran the test again , and immediatly at the same test it reboots my pc However i find it odd to say windows reinstalled the radeon application. No offending third party drivers have been found. But its worth a try to revert any overclocking to stock settings and remove that tool completely.
Fix by using Windows Memory Diagnostics This method will identify and repair the error caused when there is any problem in the memory. In that case, you need to in order to tackle the issue. Possibly this problem is caused by another driver that cannot be identified at this time. We do not claim any responsibility for the results of the actions taken from the content linked below - complete these tasks at your own risk. Tip: If you do not already have a malware protection program installed, we highly recommend using Emsisoft Anti-Malware. In most of the cases, the error is caused by a faulty driver or hardware incompatibility.
It did not appear that verifier was running in the full dump but since it was corrupt there is no way to tell. Often the problem will go away with a simple restart. Summary of the dumps: Code: Built by: 7601. After completing those steps see if there occurs any bluscreen again. And at the other side, all computers processors have different modes of operation which they called rings, and the particular type of ring having its own instructions and memory available to run the particular type of code.
In case of a kernel error, many computers do not show a blue or black screen unless they are configured for this. Windows Resource Protection did not find any integrity violations. Although later versions of Windows include the Windows Memory Diagnostic Tool, I highly recommend using instead. Restart the computer in normal mode. Thanks in advance for any help. Some register values may be zeroed or incorrect.
Step-2: Now Select Choose what power buttons do. Windows Operating System you want to back up. It may take some time, but please take the time you need to perform it properly. Then turn off the windows driver verifier. The most likely culprit is a problematic driver.
In the next screen, click Restart. Follow these steps in order to run the Memory Test: Step-1: Firstly, go to Control Panel from the Start menu. Also configuring your system to produce a full memory dump may help you. Usually, most of the programs launch in the Kernel mode. You may need to check the provided by Windows 10 to see if your computer hardware is suitable to run Windows 10. Also read : Method 1 — Turn off fast startup Step 1 — Press windows key + I together to open settings panel.
This must have solved your problem. Already tried to update my graphics card driver but it is already updated. You make it sound like an easy thing to do. If you would like to use this software at work or in a commercial environment you should get the professional edition of WhoCrashed which allows you to perform more thorough and detailed analysis. Driver Easy will automatically recognize your system and find the correct drivers for your exact hardware devices, and your Windows version, and it will download and install them correctly: 1 and install Driver Easy.
As before, start the computer in Safe mode. Step-2: Now locate and click on Administrative Tools. I found Driver Sweeper and removed the video files. This problem should rarely occur. Search for the Device Manager in the Control Panel and open it. Please run these two tests to verify your memory and find which driver is causing the problem.
Also back up your files. This is the one in charge of operations and has full access to use every available resource. If you would like to learn more about manual registry editing, please see the links below. Navigate to Control Panel, System and Security and Power Options. Windows 10: In the Start Menu, click on Power.