Do not stand your product on carpets or other surfaces which generate fibres or place it in locations preventing the free flow of air over its surfaces. Place the handset on the base to charge for at least 20 hours. To enter the Time for the call, press and use the keypad to enter the time. Scroll or to On or Off. Press to delete the last character or digit. Cleaning Simply clean the handset and base with a damp not wet cloth, or an anti-staticwipe. This is shown on the display.
Scroll or to the Speed dial you want to edit and press. Press the call is transferred to the loudspeaker. To interrupt and speak to the caller directly, press. Each menu has a list of options, which you can see on themenu map on the following page. If the call is from a payphone, Payphone is displayed. Putting it as high as possible ensures the best signal. Keypad lock You can lock the keypad so that it cannot be used accidentally while carrying it around.
For each additional handset and charger: 1. The name and number is displayed, press and scroll to Delete. Use the keypad to enter the time then press. Time Saver Time Saver can save you the cost of a call when you want to ring in to find out if you have new messages. Pressand scrollorto Speed dial and press. Never use household polish as this will damage the product. If necessary, replace the batteries.
Press to display the Redial list. Press to display the Redial list. Scroll to Alert tone and press. If you would like a copy of the Declaration of Conformance, please email bt. To copy a redial number to the directory 1. Press the Left soft key to open the main menu.
When entering text, press to switch between upper and lower case letters. The answering machine is switched on. To dial using a Speed dial1. Press to return to the previous menu level. When successful the display shows Copied. You will need to set the day, date and time if you have not already done so so that you will know when each message was received. To set the date, scroll to Set date and presskeypad to enter the date then press.
The internal call has to be ended before the external call can be answered. You hear your call over the handset loudspeaker. Insert a pause in a number You may need to do this if you are connected to a switchboard. If you want to delete it, press during playback. Make a handsfree call 1.
To change the Time format, press and scroll or to select 12 hour or 24 hour. Press to switch between the two callers. Only one character is changed at a time. Press to confirm, and then scroll or to the entry you want and press to save. Press any button to stop the alarm. The base indicator lights up.
Handsfree Handsfree lets you talk to your caller without holding the handset. The pre-setAnswer Only outgoing message, where callers hear an 3. Handsfree Press to activate handsfree loudspeaker mode, page 19. Pressto return to the previous menu level. Any additional handsets supplied as part of a multipack are pre-registeredto the base so, once charged, are ready for use. The strength of the signal depends on where you site the base. Press the most recent entry is at the top of the list.
© British Telecommunications plc 2008. Phonebook empty If the phonebook is empty and you press , the display shows List empty for 2—3seconds and then phonebook option New entry. Scroll or to the button number where you want to storethe speed dial entry. Press the Left soft key to open the main menu. Press and hold for 1. When the other handset answers, press to transfer the call. Delete all old messages 1.
Date and Time Set date and time 1. When entering a number, usually after entering the switchboard access code e. Please obtain and keep proof of posting from the Post Office, or your preferred carrier. Press and hold to return to standby mode. Delete a directory entry 1. Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms. Scroll to Select base and press.