Servers are often located locally and managed by the organization. The IoT system provides an infrastructure to manage large scale systems of very different endpoints and platforms, and the huge amount of data that they create. This number is called autonomous system number. The enable password on all devices is cisco. Which two features of the hierarchical design make it the better choice? Perform the tasks in the activity instructions and then answer the question.
The changes did not solve the problem and were not saved. Type 1 hypervisors are usually used on enterprise servers. The administrator notices a route to a network that is connected to a router in area 2. What three facts can be determined from the viewable output of the show ip interface brief command? Perform the tasks in the activity instructions and then answer the question. What type of switch should be selected? The exhibit shows a fog covering trees on the side of a mountain. A ping to the default gateway was issued, but the ping was not successful.
Not all options are used. Load and reliability are tracked dynamically by a device over a default period of time. A technician is configuring a router that is actively running on the network. Which access method should be chosen? A machine-to-machine M2M connection is unique to the IoT in that devices are connected together and communicate with each other. Which statement is true about the implementation of summarization in this network? Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? How do hosts ensure that their packets are directed to the correct network destination? Explain: The connections in a Cisco 1941 router include two types of ports that are used for initial configuration and command-line interface management access. The line vty 0 4 command is used to access the configuration mode for Telnet. Out which interface will R1 forward the packet? Which statement is supported by the output? There is no k6 value.
Perform the tasks in the activity instructions and then answer the question. The enable secret command is used to apply a password used on the router to access the privileged mode. This interface can also be used to connect routers to each other. Other switches in the same network can ping this gateway. What is the correct summarization for these eight networks? Virtualization separates the operating system from the hardware. Not all options are used. What is wrong with the displayed termination? Using the output in the exhibit, what is the most likely cause of the connectivity problem? What is a possible reason for this? Which command should the administrator use to forward the summary route for area 15 into area 0? Which command will display these values? Routers, switches, and firewalls are infrastructure devices that can be provided in the cloud.
. Correct Answer: converged Currently, many things are connected using a loose collection of independent use-specific networks. A switch was configured as shown. Which solution would be the most cost effective method of providing a proper and secure connection between the two corporate networks? Finally, M2M refers to communication from machine to machine. The reported distance of the feasible successor route for the 172. Key topics include QoS elements, virtualized and cloud services, along with controller types and tools that are available to support software defined network architectures. Which two statements are correct? The copy running-config startup-config command is entered in R1 mode.
What is causing the problem? This will allow more devices on a particular switch. Cisco developed the Cisco IoT System to help organizations and industries adopt IoT solutions. What acronym is used to reference the data link sublayer that identifies the network layer protocol encapsulated in the frame? Not all options are used. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Not all options are used.
The configuration file contains an enable secret password but no console password. This server required power, a cool environment, and a method of backup. Which type of static route that is configured on a router uses only the exit interface? Not all options are used. How many broadcast domains are displayed? We will update answers for you in the shortest time. R2 has two possible paths to the 192. Which statement about router interfaces is true? After the configuration shown is applied on router R1, the exhibited status message is displayed. Virtualized systems still need the proper licenses for operating systems or applications or both and still need the proper security applications and settings applied.
Suddenly, power to the router is lost. Which three commands are used to set up a password for a person who attaches a cable to a new router so that an initial configuration can be performed? How can the network administrator reduce the number of devices that receive broadcast traffic? The data plane forwards traffic flows. Unlike Type 1 hypervisors, Type 2 hypervisors do not require a management console and do not have direct access to hardware. The contents of flash may be lost during a power cycle. Which statement describes the media access control methods that are used by the networks in the exhibit? The Internet of Things IoT connects devices that traditionally are not connected to the Internet, such as sensors and actuators. If the technician has not saved the configuration, which two types of information will be lost? What command should be issued? Which hashing algorithm would provide the strongest level of message integrity? Based on the test results shown in the exhibit, which device does the technician have connectivity with and which device does the technician not have connectivity with? In an IoT implementation, devices will be connected to a converged network to share the same infrastructure and to facilitate communications, analytics, and management. Not all options are used.