However, when computer runs slow or attracts virus, many people will check and install updates manually. If you are unsure of how to do this, please see below. During reboots, it just sits at configuring updates until I kill TrustedInstaller remotely. If it finds any known errors it fixes the errors. It appears that there is a conflict with some audio drivers and this is causing it to hang on startup. Anytime you do a upgrade, you need to back up the files on the computer, so that you do not lose files. In fact, I remember one computer in particular where it took over an hour to finish, then everything worked just fine.
I guess I was just too impatient lol. As of this writing, there's a series of four updates that are the culprit. Mac software upgrades do have issues too. Maybe you should keep using windows 7? Log into the Logitech Harmony Remote Software on your computer 2. All updates installed fine, with the exception of those offered as optional, which appear to be still waiting in Windows Update to be installed. Do not turn off your computer.
I did not want to cold reboot the server obviously. So it sat like this for over 2 hrs while I was out. I reinstalled windows 7 64bit the other day and was doing the 211 updates. Apparently: there is a windows 10 update which is incompatible with your system. This problem mostly due to software conflicts or some mistakes on Microsoft update. There is a spinning circle nest to the 35% compleate so i know the screen hasn't frozen. Basically you have to manually do the updates.
I guess all I can do at this point is do a system restore or something. Running win7 on a macbook pro via bootcamp. Should you force it down again, it will want to run check disk. Code 35 sounds like a driver issue if you are having trouble with your drivers here is a general look at the drivers and how to update them if your computer came with a motherboard disc the drivers could be on it click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark? Do not compare or recommend products. Switch it on and let it get on with it. Somewhere along my work, I also created a recovered Operating system which is invalid so when I boot up it. Try to research your issue before posting, don't be vague.
My F8 key does not open the safe mode option. This was spot on what was wrong with my update installation, and your article allowed me to recover from this hang-up. We are up-to-date on important updates, and there were 3 optional updates. I forced a remote hard reset after waiting 20 minutes. So I powered it off and on into safe mode, and now it's stuck again at 35% complete. . How can I get it to finish the process and boot on up into Windows? Try to install the updates in clean boot to avoid other program confliction.
The other night it was going through automatic updates, and we had a power failure. It was on that at 10. Remove the batteries from the remote. I went in and removed the pending. Regardless, this problem does seem to have occured to multiple people with their Windows Updates getting stuck and I don't think anyone really knows why it is happening, which is not very comforting when you see your pc has updates to install and you wonder if you install them will it get stuck! Windows 7 is certainly a stable and proven product, so nobody could fault you for downgrading back to it. By interrupting that it will take longer.
After solving your problem, please mark it as solved by clicking 'flair' and confirming the 'solved' tag. Sort by: or Check out our , all guides are compiled by our Trusted Techs. I had some success with unmounting the drive but when I reboot again, everything went back to my problem state. I've found that if I uninstall iTunes each time I need updates, they will configure without problems. ยท Which update is being installed on the machine? You're not playing that evening, may as well pop in a movie and forget about it. Do you think I can continue using my pc without installing any of the updates, or is that out of the question and should I simply return it and downgrade back to windows7? Click on the Firmware button. I'm going to leave it on over night, but this is driving me insane.
Similar help and support threads Thread Forum Hey all. Which operating system are you using? If the updates install, then upon restart it fails configuration and reverts back. Plus, I can access the public files over my network. You may be able to remove the hard drive and Rename the SoftwareDistribution or Downloads directory using another computer, then reboot. Put your windows dvd in the drive, start the pc Boot windows from the dvd, select system restore and restore to an earlier point. Its been loading its updates since yesterday morning.
I've tried a number of things to fix it, but nothing has worked. I tried to boot to Safe Mode, Safe Mode with Network, or Safe Mode with Command Prompt. It turned out it was to do with the Software Protection service not starting, which in turn wasn't working because ipv6 wasn't enabled. You can pretty much count on re-creating this issue by simply running an elevated Disk Cleanup gives you the Windows Updates Cleanup option , check off pretty much every box, clean, and restart. That is what I had to change permissions on, so I could delete it. Thank you again for posting this.
The subreddit is only for support with tech issues. Put the windows 7 disk in the drive again. If possible try to kill that update in safe mode too. None of what has been done? A stuck update usually isn't a critical problem, but it's certainly annoying-- especially when you want your computer to start up in a reasonable amount of time. And there is absolutely no way out for the end users, because canceling the configuration process of the updates is a move equivalent to losing access to the entirely. Hard drive light's flashing randomly and the spinny icon's spinning, so it's not frozen. No soliciting of any kind.