Following this, wipe area dry with a clean, white, cotton cloth. Start the engine of the booster vehicle and run the engine at a moderately increased speed. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. The system is not able Contact your to play a reproduced authorized dealer. See Touchscreen functions later in this section. Defrost: Distributes air through the windshield defroster vents and demister vents.
All guidelines if enabled have been removed when the trunk is ajar. To tilt the head restraint, do the following: 1. You can view calendars from one previous year and the next 10 years. The tether anchors are located rearward of the seat back in the convertible top sling. Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft® or equivalent replacement parts. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the. Keep the ignition on for at least three seconds, but no more than 10 seconds.
You can then choose to Skip or Lock a certain channel. Note: Make sure that the latch handles are pulled down and in the fully opened position before the top makes contact with the windshield header. Note: If you experience any difficulties with the removal or installation of the sealant canister, consult your Ford Motor Company authorized dealer for assistance. Your primary responsibility is the safe operation of your vehicle. Phone Number Touch this button to search for a destination using the phone number of a saved point of interest or address book entry. When the obstacle is fewer than 12 inches 30 centimeters away, the warning sounds continuously. Wipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing.
Remember that even advanced technology cannot defy the laws of physics. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and should be inspected by an authorized dealer. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. If your vehicle seems to pull to one side when you are driving, the wheels may be out of alignment.
The included funnel has been specially designed to work safely with your vehicle. If the authorized dealer employees cannot help you, they can direct you to the nearest Ford affiliate office. Press the button to unlatch the trunk. Check seat covers and buckles before you place a child anywhere near them. Note: The indicator lamp will illuminate for a short period of time when the ignition is turned to the on position to confirm it is functional. The steering feel will be locked in sport mode and steering feel will not be.
The kit is located in the spare tire well in the trunk. Select the desired genre and choose a channel by pressing the channel name button. Update of channel No action required. The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information. Pull the rear window switch up and hold it for three seconds.
Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened. Flexible Visor Storage System The system can accommodate various storage accessories. A sunglasses clip and multi-function clip are provided. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted. This setting can also be used to defog and clear the windshield of a thin covering of ice.
If you hear the chains rub or bang against your vehicle, stop and retighten the chains. Remove any visible corrosion or loose particles. When you release the accelerator pedal, you will return to the speed that you previously set. Remove the front fasteners of the shield to gain access for service. If you select: You can: Display.
Insert a flathead screwdriver between the rear of the sidemarker lens and the bumper fascia. To improve air conditioning when starting your vehicle, drive with the windows slightly open for two to three minutes. Restore Default Touch the Reset button to return the settings Settings. This could cause a drain on the battery. Note: If the engine does not start on the first try, wait for a short period of time and try again. Enter the name of the first street, then the first letter of the second street.