During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries. Wait until the weather clears before trying to drive with the wipers inoperative. Minimize the time Warning spent viewing the monitor screen and listening to the voice guidance while driving. Never attempt to repair it or insert a screwdriver or anything else. Tread wear, traction and temperature grades 12. Wipe the condensation off the map disc with a soft cloth. Press the switch to turn the seat warmer on or off.
Driver and front passenger buckle switches The buckle switches on the front seat belts detect whether or not the front seat belts are securely fastened and further control the deployment of the air bags. Bring all transmitters to an Authorized Mazda Dealer when the electronic codes need to be reset. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible. This could weaken or damage the tether or tether anchor and result in injury. Don't maintain one constant speed, either slow or fast, for a long period of time. This is the quickest and best way to address the issue.
The wrong cap can result in a serious malfunction of the fuel and emission control systems. Important Notes About This Manual Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer. Displays 5 city name list nearest the current position. Other cleaning agents and additives may damage the system.
Select an avoid area to be deleted. Changes the selected category name Set a memory point using your preferred method. If you're unsure of how tight the nuts should be, have them inspected at an Authorized Mazda Dealer. Contact an Authorized Mazda Dealer as soon as possible. If only one pair of seat belt tongue and buckle, either tongue A and anchor buckle B or tongue C and anchor buckle D , is fastened, the seat belt cannot provide full protection. Consult an Authorized Mazda Dealer as soon as possible even if the brake light is no longer illuminated. Turn the socket and bulb assembly counterclockwise and remove it.
This should be done as soon as possible. From the beginning,dealer answered very quickly. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. Do not install it in a ship, aircraft, or any other vehicles except an automobile. Tighten Drain plug Black plate 259,1 Maintenance and Care 4.
Turn the socket and bulb assembly counterclockwise and remove it. Do not use excessive force as it may damage the cap or scratch the painted bumper surface. Use only a genuine Mazda lighter or the equivalent. A seat belt used in this way can't spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode.
Damaged Front Seats: Driving with damaged front seats is dangerous. To secure the jack Perform the removal procedure in reverse. Please contact your Authorized Mazda Dealer for more information. Install the new bulb in the reverse order of removal. When doing recreational towing refer to Towing Description page 7-19 and Tiedown Hook page 7-20 and. Even with the front passenger seat weight sensors, if you must use the front passenger seat for children, seating a child in a child-restraint system on the front passenger seat under the following conditions increases the danger of the front passenger air bag deploying.
On a steep grade, the vehicle may momentarily slow down going up or speed up while going down. I was able to install a Mazdaspeed grill with very little difficulty. Install the new bulb in the reverse order of removal. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately. Up to 3 transmitters can be used with the keyless entry system per vehicle.
Fuel and Engine Exhaust Precautions. If the lighter doesn't pop out within 30 seconds, remove it to prevent overheating. The number is on a plate attached the cowl panel located on the left corner of the dashboard. Don't coast with the ignition switch turned off. If they don't resume functioning, consult an Authorized Mazda Dealer as soon as possible.