The pump is supplied without a pneumatic compressor. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. We have the liquid pump, gas booster or air amplifier that you need! Detailed Images Machine Parts Name: Air filter Air filter with a vacuum alarm, double filtration; external high exhaust silencer, the external protective shield against hot processing; setting reversing buzzer, make driving safer. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. The outlet pressure is easily to set through a simple air regulator. All medium pressure valves and fittings use the medium pressure style connection.
Test pressure: 450 bar 6 each 50L cylinders can be pressurized up to 300 bar in 27 seconds. You can click on the 'Additional information' button to find detailed information on the use of cookies on this website. We can also create custom replacements, some parts such as custom nipples can even be created and shipped the same day. Exceeds industry standard of 20,000 psi. The compressed air from the standard air system is compressed to the desired higher final pressure. No air lubricator is required since the pump received Barium grease treatment.
The pump can be equipped with a pressure switch. To ensure an optimum operation pressure and flow of the pumps, the port sizes of the pumps shall not be reduced. High pressure products from Maxpro Technologies feature Maximator liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings and tubing. The desired operating pressure can be preset by means of the air control unit in correspondence with the different pressure ratios. This coned and threaded connection features orifice sizes to match the high flow characteristics of the medium pressure valve, fitting and tubing line. Numbers of test pressure: 4 Pressure relief valves M647-485 are not included, to be offered separately. The top supplying countries are China Mainland , Pakistan, and India, which supply 95%, 2%, and 1% of maximator respectively.
To achieve this, we save information about your visit in so-called cookies. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. Gives very fast pressurization in one smooth operation without any shocks. Drive air connection and initial operation The air drive connection is located at the spool valve housing. Maximator Australia offer a complete range of high pressure equipment.
Maximator pipe valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. If there is only very dry air available, an air lubricator is needed. Numbers of test pressure: 4 Pressure relief valves M647-485 are not included, to be offered separately. The units are capable of increasing normal pressures of 4 bar or 6 bar to the desired final pressures. The liquid to be pumped, flows into the suction chamber by the up-stroke of the drive piston. Air filter with a vacuum alarm,double filtration;external high exhaust silencer,the external protective shield against hot processing;setting reversing buzzer,make driving safer.
Supplied with 4 pcs remote controlled stainless steel ball valves. The pump is manually controlled as standard. Note: When selecting multiple items, the pressure rating would be that of the lowest rated component. The automatic double acting system will reduced the waiting time as the pressure boost will automatically be repeated until the target pressure is reached. All high pressure valves and fittings use the high pressure style connection.
Industrial gases like Argon, Helium, Hydrogen and Nitrogen can be compressed to operating pressures of 2,100 bar 30,000 psi , Oxygen to 350 bar 5,075 psi. The down-stroke generates the pressure at the liquid side. The oil piston is separated from the water piston. We have professional design team, we can design what you want according to your requirements. This is a simple, safe and economic mode of operation. This includes Gas boosters, Air Amplifiers, Liquid pumps, Valves, fittings and tubing. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.
Stainless steel pipe work, all wetted parts non-corroding in water. By using a balance it is possible to measure the amount of water passed into the cylinder under test and, on decompression, measuring the amount of water returned. Exceptional Customer Service Call today to talk to a knowledgeable engineer that will help you select the right replacement component for your equipment. The pump shall be connected to the main water supply. Test pressure: up to 40 bar as standard.