We wish you an enjoyable driving experience. Turn the right rotary knob to select the first letters of the desired entry. Do not initialize the Flat Tire Monitor if snow chains are mounted; otherwise, the instrument might issue an incorrect reading. To decrease the inflation pressure: press the release button 9. These tire inflation pressures can also be found on the driver's side door post when the driver's door is open.
Before manually unlocking the selector lever lock, firmly set the parking brake to prevent the vehicle from rolling away. Opening, closing With the ignition switched on and the glass sun-roof tilted, press the switch backward and hold it there. Turn the right rotary knob to select an entry and press the right rotary knob to dial the phone number. In addition, exhaust gas may flow into the passenger compartment. Operational readiness of airbag system As of radio readiness, page 39 , the warning lamp lights up briefly to indicate that the entire airbag system and the belt tensioners are oper-ational. Even when the alarm system is armed, you can open the liftgate by means of the button on the remote control. The selector lever can only be moved out of position P when the ignition is switched on or the engine is running.
Convenient operation via door lock or Comfort Access, refer to page 20 , 22 , 26. Tilt alarm sensor The vehicle's inclination is monitored. Incoming call Receiving calls If the phone number of the caller is stored in the phone book and the phone number is transmit-ted, then the name of the entry is displayed. Four Star Rating on Yelp. Have the system checked immediately. Deleting an individual entry 1. Press and hold the button until the display changes.
The tilt alarm sensor and the interior movement detector are switched off until the car is next unlocked and locked. The front, side, and knee airbags for the front passenger are activated. To use the automatic mode again, move the selector lever to the right into position D. Operating from inside Button for central locking system, page 22. No flat tire can be detected.
Actions in the event of a flat tire Normal tires 1. Service requirements The remaining driving distance and the date of the next scheduled service are briefly displayed immediately after you start the engine or switch on the ignition. The indicator lamp does not come on as long as a person of sufficient size and in a correct sitting position is detected on the seat. An acoustic signal also sounds. Drive cautiously and think well ahead. Function buttons Press the button. Press and hold the button until the display changes.
Check Control mes-sages can be viewed whenever it is convenient. A mobile phone that is connected to the vehicle should not be operated via the mobile phone keypad; otherwise, malfunctions may occur. After you release the brake, immedi-ately start driving since the Hill Assist only holds the vehicle for about 2 seconds, and it will start to roll backward. Press over an extended period of time; otherwise, the the + button to increase it. Activating Adaptive Light Control With the ignition switched on, turn the light switch to position 3 , refer to page 67. Therefore, do not leave them on for unduly long periods of time; otherwise, the bat- Page 72 Lamps 70 tery might not have enough power to start the engine. Press the button for a longer period.
Normal wiper speed Press once. Deactivate the rain sensor before entering an automatic car wash. The settings are stored for the remote control currently in use, refer also to Personal Profile on page 18. Every time you press the but-ton, the speed increases by approx. Depending on the mobile phone, the call is automatically switched to hands-free mode. Otherwise, the engine could be damaged.
If so, delete the con-nections with other devices on the mobile phone. Symbols used Indicates precautions that must be fol-lowed precisely in order to avoid the pos-sibility of personal injury and serious damage to the vehicle. Displaying call duration To display the duration during a call: Press the button. Four Star Rating on Yelp. Watch during the closing process to be sure that no one is injured. Adjusting volume Turn the knob until the desired volume is reached.
Punctures are not indicated Have the system checked. Intermediate settings and colors are possible. In the event of a fault in the airbag system, have it checked without delay; otherwise, there is the risk that the system will not function as intended even if a severe accident occurs. Page 54 Controls overview 52 1. Each digit can be spoken individually or com-bined into a sequence to accelerate the entry process.
On uphill grades vehicle speed may drop if the engine output is insufficient. The system detects a pressure loss in a tire by comparing the rotational speeds of the individ-ual wheels while moving. Ignition cannot be switched off Engage selector lever position P when you wish to switch off the ignition, page 39. Comply with local regulations when doing so. The phone number can also be dialed using the buttons on the steering wheel or radio: Press the button. Turn the right rotary knob to select the desired entry and press the right rotary knob. The design of the second-generation convertible looks enough like the first that there is little difference to casual observers.