He came back in 5mins saying he's done it with a help of flat screwdriver. Hi, came in here for guidelines whilst my friend was outside trying to figure out how to remove the cupholder to insert the new one. Most probably something came out from its original position. This makes putting a hitch from a Ranger onto a Windstar a structuraly problem. You can find info at: www.
Could someone point me towards any walkthroughs on here that could help me? Any suggestions, where to start? Hot coffee that stays where you put it. Insert a flat screwdriver in the gap just on the top of the cupholder, and press it down a bit to release the 2 little hooks thats holding it in and out it comes! I have done it twice crappy holders maybe?? But just so you know. I have a 2004 polo e, thanks. Ignore the pic of having the whole cupholder out- it's the new case where I put in the old part i removed, just to show you how to do it. Right side seems to be going in normally, but the left side is completely stuck somewhere.
Hello I managed to breake the cupholder whilst cleaning the windscreen. When i replaced my earlier design with the newer one it involved me snapping a peice of plastic out of the back of the dash Can be done without removing the dash. To find the rear three you must remove the front panel the one near the window. The cup holders are held by 3 screws - 2 on the top and 1 on the bottom, facing towards the passengers. Does anyone know how much or if this tray is still available from Toyota? Our selection of brands is always growing, so chances are your favorite is on AliExpress.
Insert the new part carefully aligning the two little wheels dunno the name of them? Soft touch finish looks lots better than the hard plastic used in bargain basement parts. We believe in helping you find the product that is right for you. Its just alot more fiddly but doesnt take long. . It took the dealer about one and a half hours at least to replace it - good job the warranty covered it.
It's a bit fiddly and you may have to select from a number of different length screwdrivers to find the best fit. Unfortunately you have to remove the dashboard to replace the cupholders, If you will not fix them with the way the other members said. Could somebody give me some hints how to remove the holder as easily as possible? From time to time, it may be necessary to remove the cup holders to access any lose change that has slipped behind the cup holder. Try finding the one that is right for you by choosing the price range, brand, or specifications that meet your needs. Took me about 2-3 hours. Hope it helped a bit! They are held in with 2 self tapping cross head screws. If you are interested in mk4 cup holder, AliExpress has found 221 related results, so you can compare and shop! Once put back in place, the locking function was restored.
It's quite difficult to unscrew them and involves disassembling half of the dashboard. Honda Odyssey cup holders should be removed and replaced as needed whenever there is maintenance being done on the car's interior. Before you drown your radio. Its just alot more fiddly but doesnt take long. If, however, you want to just take the hitch off of the Ranger and bolt it up the Windstar, that would never work.
If you know how to weld pieces onto or cut pieces off of the hitch, there is always a way to make the hitch work. As long as you don't need to replace the actual body of the cupholder mine had the actual part that holds the cup in place broken - the one that fold in when you push the cupholder in , you can replace or remove the moving part of it. You might find it useful to get one of these flexible extenders or a screwdriver with a very short handle: You can replace the cup holders without removing the dash top. Now I thought this would be a simple job for the dealer to replace under warranty - well the only way to release the cupholder is to remove the entire top of the dashboard. I lost my retainer in the rear cupholder in the 1998 ford winstar and it wasent good! I got fed up with jamming bits of card into it. I wish you the very best of luck. I found I had to use a small screwdriver ratchet to get the correct angle to undo it.
They are held in with 2 self tapping cross head screws. I've been given a quote of £30 from someone for a second hand one and not seen any photos to confirm condition. When I collected our car I noticed that the passenger side cup holder was broken the middle bit was missing. Not much use to you maybe, but if you are really desperate then I'll part with it for a low price, but I'd prefer if you got a better condition one elsewhere to be honest. Upgrade to a new, improved center console with three, easy-clean cupholders that won't dump coffee on your radio when you stomp on the gas. I'd take a look around on ebay to find a good one, as my one ejects a bit too fast compared to the new one I fitted, and also it needs a new front flap due to a few scratches.