These things softened right up with a little heat, they stuck and moulded right on to fit like a glove! The film is very thick and hard to work with if you can't keep it heated. I installed these today by myself with no problem. The ad made them sound great, so I placed an order. But, after a month, All the tiny bubbles disappeared. You will need a helper.
Your team even delayed my purchase when it realized that Toyota updated its records of the current product available. Recently, when I needed something to do, I decided that I would install them and take my chances. This is a quality product and I do recommend it. I was able to remove almost all the air bubbles with my fingers then used the squeegee to remove the soapy solution. The LampGard Headlight Protection is the very best product one can imagine. I bought the lampguard headlight protection to protect my headlights from bugs and small stones. Both headlights came out crystal clear.
Take your time and you'll have no problem with the installation. I have had my Edge for only 2 weeks so the headlights were not dirty and I used Windex and a fiber cloth to clean them before starting. When I received the kit, I was a bit skeptical as I was initially intimidated with the steps. We are very satisfied with the results and will be purchasing this product for our other car. We normally use express to do the shipment, 5-7 working days, the goods will arrive you. I threw the package on a shelf and figured that I had wasted some forty dollars, and that I should have known better anyway. Please let us know where are you come from We can check shipping cost to your place directly with this information.
I have already been through the car wash several times without incident. . I have previous experience with window film and the carbon fiber film so I tried to install it by myself and one headlight came out really bad and the other was a total loss. Don't need to replace the whole headlight assembly, you only need to repair your plastic headlight lens cover, it means only need to replace the lenses cover and then your headlights can back to condition as new. We bought mew headlamps because the original ones yellowed and became hazy so badly. Email us the production year and model of your car. In most cases, we have found that the wet installation yields the best-looking installation.
Protect your lights from scratching, pitting and staining with the WeatherTech LampGard. After seeing the results, I am also impressed with how forgiving it was as I had to re-position the first one a few times during installation as I got the hang of it. On larger headlamp pieces, the wet installation method is recommended as bubbles and improper alignment of the material are far less likely. We will work with you for a fair resolution to any issue you may have. Although, very few and seemingly simple, I was immediately concered about being able to curve the protector over and around the headlight. Kelly Hudgens First, they were cut perfectly but they are thick - nothing like those screen protectors for phones, iPads, etc.
About a week later, I was blown away about how crystal clear they have become. Installation WeatherTech recommends professional installation, but LampGard comes with easy-to-follow instructions and applies to headlamps, fog lamps, turn indicators and parking lights when applicable to protect them from scratching and pitting. The removal process is simply a matter of warming the plastic, and peeling the LampGard away from the surface of the headlamp. Exclusions to this warranty include wear due to severe abrasive conditions, chemical contamination, such as spilled gasoline, bleach, vehicle accidents, misuse, abuse, incorrect installation, incorrect use, etc. Go-Parts customer service staff was very helpful making sure I ordered the correct part for my 1996 Toyota mini-van. LampGard is made of a high-performance polyurethane film that is virtually invisible and applies directly to the lamp surface.
LampGard Headlight Protection offers exceptional protection for your headlamps. I am a happy customer! We do not charge extra for our products to our vast majority of customers so we can accommodate ridiculous warranty claims by the few. Some air bubbles were trapped under the covers after installation. I used similar ones when I lived in Alaska and they still looked very good after ten years use. Hello, About a year ago I ordered the WeatherTech Lampguard kit for my 2001 Toyota Tacoma.
There's a little movement of the film when using the squeegee but you can use your fingers to move it back into place. I was delighted to find that somehow the covers made the light haze on the one troublesome lens disappear. They were a little cloudy at first but, as you promised, they have become crystal clear. It's better to show us the picture of the part you need or tell us the part number. The order quantity you need. How wonderful to receive an e-mail stating I need to call into your company to ensure the parts I ordered met my car requirements. Once the excess is properly spread about the perimeter of the LampGard, the material will easily lay flat on the lens.
I am very pleased with these covers. The instructions did state that a hairdryer might be helpful, and I am saying that a hairdryer is crucial. On smaller pieces, such as fog lamps, the dry installation method is sometimes easier. I never heated the lens when applying. Like tires, brake pads or the shoes on your feet, everything wears out and when it does, that does not mean you did not receive good value for your money. Proof of purchase is required. Our decision is final and will consist of either replacement of your product at no charge or charge you a prorated amount for a replacement, meaning we may extend a discount to you to purchase an exact replacement.
That does not mean that a product that simply and naturally wears out from normal use is a candidate for a warranty replacement or a refund. You can't keep the product and your fingers wet with solution, heat the material, and work the material alone. If any adhesive remains on the surface of the headlamp, it can be removed by rubbing the excess adhesive with your thumb. Our goal is to keep our customers happy for a lifetime and always reach a fair resolution to any issue. Its built-in ultraviolet inhibitors prevent the material from discoloring, and its self-healing technology delivers unsurpassed scratch resistance.