You need to disable the secure boot option. See my comments on Thanks for contributing an answer to Ask Ubuntu! It was as if the booting sequence was too fast for my Usb drive. Runs ok and everything but I want my lappy to be in its original state. I was worried because my grandaughter needs Open Office for school, but I researched that and it's fine. This was the fix for me! It is marked by a small indented circle on the bios chip. I then clipped the bottom of the case back on loosely, plugged in the power and pressed the power button.
Crazypants how did you solve this issue? I decided to remove it, assuming it was the system clock backup battery. Precisely the same thing occurred. I called support and they are useless. I have not looked at your links yet, this being Sunday and that involves a pint at lunchtime here U. Other key combinations: Fn + F11. In my case I have read bios from motherboard with programmator I had corrupt bios.
About a week ago it had the Cryptowall virus in it and of course all the information was encrypted so I dumped it. Either disc image should work on most computers, though if in doubt plpbtnoemul. After installation, launch it and you will see the main interface below. I ran into the same problem when I changed from Windows 10 due to it's current flaw -the increased internet usage through background apps and system updates to windows 7. It just boots into Ubuntu log in page and after I login nothing happens. When I go to the boot menu, the screen says: Boot Option 1 Windows Boot Manager Add New Boot Option Delete Boot Option There is no option to boot from anywhere else! Just after i used the ccleaner, all my apps are not working that's why I decided to restart my laptop then It didn't turn on, just a blank screen.
Step 2: Power on or restart computer. But it still didn't recognize my usb pen drive. Fuduntu runs great from live boot usb. I've tryed reinstalling ubuntu-desktop but it wont install. I followed all the reset suggestions etc in various forums but nothing. Here are the steps: Step 1.
Your flash drive may be found there. The boot selection failed because a required device is not accessible. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 on this site the. This is why it would be worth your while to check if the drive is actually bootable. Should I have tried something different? You can find that information here from a post i saw Here are useful references: - I figured it out! I'm starting to lose hope that I'll be able to repair it. Would this make a difference? My thought was the fan was dead, as the fan and cooler assembly seemed to move like it was broken in some way. Ok so I have recently built a computer for the first time, everything seemed fine when it turned on and I got to the Bios.
A problem has been detected and windows has been shut down to prevent damage to your computer. There are numerous tutorials on google for reformatting a hard drive. Browse other questions tagged or. Cheers, Hi, Which quite likely means that media is still not bootable. Then it moved to say 'Reboot and select proper boot device' or Insert boot media i selected boot device and press a key. In case others may search for it, this also worked on my Asus Q400A. Then tap f9 and check if boot menu has changed.
Provide details and share your research! Now i tried the same and it doesnt seem to work. I'm sure I don't have it totally correct but that is one answer I have found on the net. Is there a different type of program I could use to repair the boot partition table? I hoped the screen problem was some kinda Windows driver issue, but I now have the same problem with Linux. If that's the case and I have to return them I am going to flip out. I carefully desoldered the old one by using a soldering iron on each pin of the chip and prying them gently until they bend up. In our case, they are at the bottom of the screen.
I would suspect that because of the memory dump error. Its an Asus u45jc laptop. I booted up my MacBook Pro and ran a first aid check using disk utility. I cannot believe how hard it was to find an answer to this problem. Another thing you can do is to check for a bios update. Nothing happened until I released the power button. This results in a unbootable system.
I have the same problem with my x202E. If this becomes too much to bother with any longer then you can also which always works. I think next I want to see if I can somehow lift the product key from the motherboard. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 on this site the. Now i tried the same and it doesnt seem to work.